E2U 6150RC — the base coat that goes down on slabs that fail standard epoxy.
2-hour broadcast-to-scrape. Safe to 6% moisture content. No extra primer. 100% solids. The foundation layer for flake floor systems that have to last and go down fast.
Request TDS Call UsNational Distribution · Stocked in QLD · 35+ Years of Surface Coatings Heritage
Standard epoxy fails at 4-5% MC. 6150RC is safe to 6%
Concrete moisture is the single biggest reason flake floor systems delaminate. Most base coats need a separate primer above 4% MC, and most fail outright above 5%. 6150RC is engineered to bond to these slabs that defeat standard epoxy, green concrete, rehab work, ground-floor commercial sites without the need for extra vapour barriers.
Tramex Reading | MVE (lbs) | Standard Epoxy | E2U 6150RC |
|---|---|---|---|
0–4% | <3 lbs | Low risk | Total safety |
4–5% | 3–5 lbs | High risk — requires primer | Safe — no extra primer |
5–6% | 6–10 lbs | Critical — will fail | Safe up to 9 lbs MVE |
>6% | >10 lbs | Certain failure | Requires specialised MVE barrier |
Source: E2U 6150RC technical data. Verify slab readings with a calibrated Tramex meter before specification.
2 hours from broadcast to scrape.
Standard base coats need overnight cure before you can reclaim loose flake. 6150RC doesn't. Broadcast flake straight into the wet base, wait 2 hours, and you're scraping back to an even profile the same morning. Topcoat goes down the same afternoon. Full flake system in a single day, no second mobilisation, no overnight condition risk, no two-day labour bill.
Step 1: Lay and broadcast.
6150RC goes down. Broadcast flake immediately into the wet base.
Step 2: Wait 2 hours.
Flaked base coat reaches scrape hardness. Standard epoxy is still hours away.
Step 3: Reclaim, scrape, topcoat.
Reclaim loose flake, scrape to even profile, apply E2U topcoat same day
10-year warranty on the full E2U flake system
When 6150RC is used as the base coat in a complete E2U flake system (base, broadcast, and E2U topcoat) the install carries a 10-year adhesion warranty backed by the US manufacturer and held locally by Parkway Commercial Group. One supplier. One warranty document. National stock.
The warranty applies to the system, not the base coat in isolation. Pair 6150RC with a non-approved topcoat and the warranty does not transfer.
Warranty termsWhere applicators put 6150RC down
6150RC is specified as the base coat in commercial flake systems where moisture, schedule, or substrate condition rule out standard epoxy.
- Garage Foors
- Food production facilities
- Workshops & service bays
- Retail back-of-house
- Commercial Kitchens
- Warehouses & logistics
- Aged care & healthcare
- Manufacturing Facilities
Erebus Motorsport Workshop
Melbourne VIC - 1400m2
Full flake sytem completed in 6 days utillising 6150RC and Poly85 from E2U. Moisture levels were high, making 6150RC the perfect one step base coat. Completed in 4 sections, the workshop was able to easily work around the floor installation
Brisbane Showgrounds
Brisbane QLD - 250m2
Rapid return to service and the perfect balance between slip resistance and cleanability were required for this project. Many other coatings were considered but 6150RC and Poly85 we ultimately chosen for speed and realiability.
Car dealership and workshop
Sunshine Coast QLD - 325m2
This dealership/workshop was able to be completed in a single day after grinding thanks to 6150RC. This was a major selling point to the end client as less days shut down meant less revenue lost.
6150RC - at a glance
Property | Specification |
|---|---|
Product type | 100% Solids epoxy base coat |
Recoat time | 2hrs after broadcast to scrape and reclaim |
Moisture tolerance | Up to 6% MC / 9 lbs MVE (no extra primer) |
Substrate | Concrete, including moisture damaged slabs |
Coverage | 40 - 45m2 |
Packaging | 2 Gallon / 7.57L |
Warranty | 10-year adhesion warranty on system |
Request a TDS or want to know more?
Tell us about your next job and we'll send the TDS, warranty terms, and more to help you deterimine that 6150RC is correct for you jobs.
We'll respond within one business day. Submissions go to admin@parkwaycg.com.au
Ready to order?
6150RC is held in stock at our Baringa QLD and Berwick VIC warehouses and dispatched nationally. Call us, email, or click the link below.
Order now